In response to global climate change and global consensus on energy conservation and carbon reduction, in response to the sustainable development of the world’s environment and enterprises, the Responsible Business Alliance Code of Conduct is used to evaluate cost-effective methods for improving energy efficiency in the plant area. Anhuan General Affairs Department conducted a preliminary energy consumption check and found that the company’s current lighting facilities (fluorescent tubes) and the market’s light-emitting diode lighting facilities (LED tubes) had significant differences in energy consumption and overall energy efficiency of illuminance. Energy utilization assessment and planning, and follow-up engineering plans are drawn up.

Evaluation of Energy Conservation and Carbon Reduction Benefits

Light tube	Fluorescent tube (TLD)	Light Emitting Diode Tube (LED)
ampere	0.5A	0.1A
volt	220V	220V
Kw/hr	0.5A*220V/1000度 =0.11(kwh/ hr)	0.1A*220V/1000度 =0.022(kwh/ hr)
Annual carbon emissions (250 working days per year, 11hr daily use) CO2e/degree=0.554Kg	0.11(kwh/11(hr/day)250(day)*0.554(kg)=168 Kg	0.022(kwh/11(hr/day)250(day)*0.554(kg)= 34 Kg

Energy saving and carbon reduction goals The total number of lighting facilities in the middle aisle of the company’s building is 100. The calculation results of the project are that each lamp is replaced with equipment, which can reduce carbon emissions by 134kg per year. Therefore, the replacement of all 100 lamps can reduce CO2e emissions by 13,400 kg per year. .

Light tube	Fluorescent tube (TLD)	Light Emitting Diode Tube (LED)
Annual carbon emissions (250 working days per year, 11hr daily use) CO2e/degree=0.554Kg	0.11(kwh/11(hr/day)250(day)*0.554(kg)=168 Kg	0.022(kwh/11(hr/day)250(day)*0.554(kg)= 34 Kg
Energy saving and carbon reduction goals	100*168= 16,800 kg	100*34 = 3,400 kg

Replacement of lighting facilities project schedule

year	2021
month	1	2	3	4	5	6	7	8	9	10	11	12
Work item	Preparation	Preparation	Preparation	Preparation	Preparation	Preparation	Preparation	Preparation	1F 18 lamp	2F 19 lamp	Preparation	Preparation

year	2022
Month	1	2	3	4	5	6	7	8	9	10	11	12
Work item	Preparation	Preparation	3F 16 lamp	4F 16 lamp	Preparation	5F 15 lamp	6F 16 lamp	Case closed	–	–	–	–

Greenhouse gas emissions and energy consumption

The company belongs to the low-pollution connector manufacturing industry. The main energy consumption comes from purchased electricity. The purchased electricity is mainly used in the energy use of production equipment. In the past two years, the main source of emissions is that purchased electricity accounts for nearly 100%, so the greenhouse gas emissions are calculated based on the overall industrial structure. Greenhouse gas emissions in the last 2 years

year	Greenhouse gas emissions (tonCO2e)
2020	6,176.437
2019	6,612.985

The company has long been concerned about the topic of water resources. During the evaluation of process equipment, the dry process is mainly used to reduce the use of water. Use it properly. Water consumption in the last 2 years

year	Water consumption (cubic meters)	Total number of employees (person)	Average water consumption (cubic meters)
2020	45,421	428	106
2019	45,316	425	107

The main sources of waste generated by the company are waste generated by employees in their daily operations, packaging materials that cannot be recycled, and damaged test components. Among them, waste generated by employees in their daily operations in 2020 waste statistics accounted for 85.86% of the total waste and cannot be recycled. The packaging materials accounted for 12.6% of the total waste, the damaged test components accounted for 1.54% of the total waste, and the total amount of the Adhering to the concept of environmental sustainability, various waste reduction measures and policies are advocated to reduce the generation of waste generated by employees in their daily operations. Waste generated in the last 2 years:

year	Total (metric tons)	Types of waste and percentage of generation
year	Total (metric tons)	Waste from employees’ daily operations	Packaging materials that cannot be recycled	Damaged test components
2020	38.73	86.20 %	11.10 %	2.70 %
2019	37.48	85.33 %	13.87 %	0.80 %

Workplace safety

In view of the importance of the work environment and employee personal safety protection measures, the company adopts the ISO 14001 management system to carry out major environmental risk control, using target and program management for priority improvement; and lower risks are controlled by operation control methods After good operation and improvement, obvious results and control have been obtained.

Occupational Safety and Health Policy

【Compliance with legal requirements】

Adhering to the people-oriented principle, attaching importance to the original intention of talents, and actively creating a safe, healthy, and friendly workplace with the legislative purpose of the Occupational Safety and Health Law to build a happy workplace environment to meet the expectations of relevant stakeholders.

【Perform automatic checks】

Regularly and irregularly, in accordance with occupational safety and health management methods and various laws and equipment standards, carry out related automatic inspection management, supervision, and improvement within the company with high standards and a cautious attitude to create a safe environment.

【Implement education and training】

Formulate an annual education and training plan to actively cultivate professional talents, and continue to track and analyze the results of personnel training, follow the changes in regulations, adjust and improve personnel safety and health training, and reduce workplace hazards.

【Prevent occupational disasters】

Collect domestic and international safety and health information, and integrate company internal resources from time to time to improve the safety level of personnel, equipment, raw materials, safety regulations, and the environment to reduce the risk of occupational disasters.

【Continuous improvement】

Carry out corrective and preventive measures, review various events within the company, develop improvement plans, and arrange inventory-type safety and health inspections in each area to identify potential risks.

Labor working environment monitoring

Work with professional safety and health agencies to develop the company’s operating environment monitoring sampling plan every year, conduct analysis and planning before sampling, formulate rigorous chemical and physical sampling plans, and complete the hazard factors based on the plan every six months Sampling, to understand the environmental exposure of workers, and then make improvement plans based on the sampling results to reduce the potential hazards of labor operations.

Safety and health check

Set annual goals for safety and health inspections, set up safety and health management representatives to support in-plant safety and health inspection activities, and regularly hold meetings to review the missing content of safety and health inspections, and continuously improve and maintain the company’s internal safety and health with the systematic P.D.C.A management model.

Equipment safety management

Establish automatic inspection and management procedures and machinery and equipment management procedures, conduct regular inspections, key inspections, completion inspections and daily hazard identification training for in-plant equipment in accordance with laws, regulations, standards and international standards to maintain the safety of the company’s internal equipment, and follow the notifications The mechanism is to establish a review of false alarm events to prevent the occurrence of potential hazards.

Safety and health education, training and promotion in the last two years

year	Education and training	Education and training hours
2021	260	963
2020	62	48

Work Safety Performance-Statistics of Staff Disability Injuries in the Last Two Years

year	Fatal accident	Disability accident
2021	Male:0 Female:0	Male: 1 Female: 1
2020	Male:0 Female:0	Male: 1 Female: 1